Verification systems ZETLAB ZET 017 et al.

Certification of vibration stands - The complex is designed for conducting primary and periodic attestations of vibration stands for compliance with technical requirements according to GOST R 8.568-97 Certification of test equipment and GOST 25051.3-83 Vibration electrodynamic testing installations. Methods and means of certification.

• Certification of vibration stands. Technical description.

Microphones and noise meters verification system - allows to carry out various types of tests according to GOST 8.257.

• The system of verification of microphones and sound meters. Technical specifications.

The hydrophone verification system is an automated workplace for conducting primary and periodic verification of hydrophones.

• Hydrophone verification system. Technical specifications.

Vibration transducers, accelerometers verification system - The system is designed for verification and calibration of: ICP and charge accelerometers; piezoresistive, capacitive vibration sensors; vibration measuring transducers according to GOST R 8.669-2009 fully automatic in less than 30 minutes.

• The system of verification of vibration transducers, accelerometers. Technical specifications.

Seismic receiver verification system - periodic verification and calibration of seismic receivers by the absolute method.

• The system of verification of seismic receivers. Technical specifications.

The dynamometer verification system is a primary and periodic verification, by the method of loading and unloading dynamometers, as well as by the method of comparison with an exemplary dynamometer, in accordance with GOST 13782-68.

• Dynamometer verification system. Technical description.

Certification system of climate chambers - for testing for resistance to temperature for compliance with the requirements of GOST R 53618-2009 (IEC 60068-3-5:2001).

• Climate chamber certification system. Technical description.

The ZET 017 spectrum analyzer verification system is an automated workplace for the implementation of output control of spectrum analyzers, as well as their primary and periodic verification.

• Verification system of spectrum analyzers ZET 017. Technical characteristics.

The shock ballistic installation UDAR-1 is designed for calibration and verification of measuring transducers under impact (both analog and digital), as well as impact tests of products for various purposes.

• BLOW-1. Technical specifications.

The verification of seismic receivers should be carried out in the low frequency region, where the relative measurement method used in the verification of vibration sensors does not provide the necessary accuracy. The fact is that the model accelerometers have an uneven frequency response in the low frequency region. Therefore, a different approach is required for the verification of seismic sensors. The use of a displacement sensor completely solves the problem of accurately reproducing vibration at low frequencies and monitoring parameters during testing.

• Seismic receiver verification systems. Technical specifications.

Price list

Catalog